What is my facial width to height ratio?

Pick one front photo and tap six points on it. You get your FWHR, the width between your cheekbones divided by the height from your eyelids to your upper lip, plus your midface ratio.

Free, no sign-up. Your photo stays on your device: it is measured in your browser and never uploaded.

What is FWHR?

FWHR, the facial width to height ratio, compares how wide your face is with how tall the upper half of it is. Width is the distance between the widest points of your cheekbones. Height runs from the top of your upper lip to the top of your eyelids. Divide the width by the height and you have your FWHR.

Unlike most face ratios online, FWHR comes from published research. Weston, Friday and Liò measured it on skulls in 2007, and Carré and McCormick used it on photos in 2008. Since then it has been used in many studies on how faces are perceived.

How to calculate your FWHR in 3 steps

  1. Pick a front photo. Face the camera with your head level and your mouth closed. Use arm's length or more, so the lens does not widen the middle of your face.
  2. Tap six dots. Both pupils, the top of one upper eyelid, the top of your upper lip and the widest point of each cheekbone. A loupe zooms in while you drag, and the drawing shows where each dot goes.
  3. Read your FWHR. Your ratio comes first, with a bar against the range photo studies report, then your midface ratio from the same dots.

What is a normal FWHR?

Most adult faces measure roughly 1.7 to 2.1 when height is taken from the eyelids, as we do. Higher means a wider, shorter upper face. Lower means a narrower, longer one. Neither end is better.

How to read your FWHR (height from the eyelids)
Your FWHR What it means
Below 1.7Narrower, longer upper face than most
1.7 to 2.1The common range in photo studies
Above 2.1Wider, shorter upper face than most

Why FWHR calculators disagree

Researchers do not all measure height from the same point. Carré and McCormick measured from the top of the eyelids. Others measure from the brow, which gives a taller height and so a lower ratio, often by 0.2 or more. Before you compare your number with a study or another tool, check which top point it used. Ours is the eyelid, and the result says so.

Does FWHR mean anything?

Less than headlines suggest. Some studies found that people rate wider faces as more dominant, and a 2015 meta-analysis by Geniole and colleagues found a small link between FWHR and aggression in men. Other large studies found little or nothing, and the link with testosterone is weak. Differences between men and women are small next to the spread between individuals, and studies disagree on whether there is one at all.

So your FWHR describes the shape of your face on one photo. It does not tell you anything reliable about your personality, health or success.

How the calculator measures it

The line between your pupils sets the horizontal. Width is the distance between your two cheekbone dots along that line. Height is measured at a right angle to it, from the eyelid dot down to the upper lip dot. That way a head tilted a little to one side does not change the ratio, and the photo size does not matter.

What does matter is the photo itself. Turning your head even slightly narrows the width. A phone held close widens the middle of the face. A smile lifts the upper lip and shortens the height. Take two photos and use the middle value if they differ.

FWHR vs midface ratio vs the golden ratio

FWHR looks at the whole upper face. The midface ratio looks only at the distance between your pupils against the height below them, a measure from face rating forums with no published norm. Our golden ratio face calculator places 468 landmarks automatically and scores three proportions against 1.618. For the profile, use the side profile analyzer.

Your privacy

The photo opens inside your browser and is measured there. It never reaches our server. A shared result link holds only your numbers. Details are on our data privacy page.

Sources

  • Weston EM, Friday AE, Liò P. Biometric evidence that sexual selection has shaped the hominin face. PLoS ONE, 2007.
  • Carré JM, McCormick CM. In your face: facial metrics predict aggressive behaviour in the laboratory and in varsity and professional hockey players. Proceedings of the Royal Society B, 2008.
  • Geniole SN, Denson TF, Dixson BJ, Carré JM, McCormick CM. Evidence from meta-analyses of the facial width-to-height ratio as an evolved cue of threat. PLoS ONE, 2015.
  • Kramer RSS, Jones AL, Ward R. A lack of sexual dimorphism in width-to-height ratio in white European faces using 2D photographs, 3D scans, and anthropometry. PLoS ONE, 2012.

Ready to find your FWHR?

One front photo, six taps, nothing uploaded.

Calculate my FWHR

FWHR FAQ

What is FWHR?
FWHR is the facial width to height ratio: the width of your face from cheekbone to cheekbone divided by the height of your upper face. Researchers usually measure the height from the top of the upper lip to the top of the eyelids or the brow.
What is a good FWHR?
There is no good or bad FWHR. In published photo studies most adult faces measure roughly 1.7 to 2.1. A higher number means a wider, shorter upper face; a lower number means a narrower, longer one.
How do you measure your FWHR?
Take a front photo, find the widest points at your cheekbones and measure the width between them. Then measure from the top of the upper eyelid down to the top of the upper lip. Divide the width by the height. Our calculator does it from six taps.
Do men have a higher FWHR than women?
Studies disagree. Weston and colleagues found a higher ratio in male skulls, while later work on large photo samples found little or no difference. Any gap between men and women is small next to the spread between individuals.
Does FWHR predict aggression or personality?
Only weakly, if at all. Some studies link a higher FWHR with dominance ratings and, in men, a small link with aggression. Others found almost nothing. Your number says nothing reliable about your character.
Why do FWHR calculators give different numbers?
They measure height from different points. Height measured from the brow is longer than height from the eyelids, so the ratio comes out lower. We use the eyelid definition from Carré and McCormick, and say so on the result.
Is my photo uploaded?
No. The calculator opens your photo inside your browser and measures it there. It never reaches our server. A shared result link holds only your numbers.
How accurate is FWHR from a photo?
Within a few hundredths if the photo is straight on. Turning your head shrinks the width, a close camera distorts the middle of the face, and a smile lifts the upper lip. Use arm's length, a level head and a relaxed mouth.